How To Measure Arrow Draw Length

I am using 1/4″ on my arrow. Now, move the hand that was touching the corner, and mark the spot where the end of your middle finger touches the wall.

4 Methods How to Measure Draw Length on your Compound Bow

To find your ultimate draw length, get your hands on a bow with a cam or cams that allow you to.

How to measure arrow draw length. To determine your proper draw length, stand upright, spread your arms out to the side and have someone measure your wingspan between the fingertips of your middle. The length from the bottom of the nock groove to the marked point is your draw length. Finally, grab your calculator and divide that number by 2.5.

For instance, my wingspan is 72.75 inches, so 72.75/2.5 is 29.1” and i shoot a 29” draw length. In order to find your ideal arrow length simply find your draw length plus.5” to 1”. Second, let your assistant measure the length of your arm span, from one finger tip to the other finger tip.

When the measurement is found (in inches), divide that number by 2.5 and the resulting number will be proper draw length. You then need to divide this number by 2.5. All of the methods discussed on this page for determining proper arrow length are for arrows that will use target or field points.

This process is fast and easy and it works great for both compound and recurve archers. Typically, this length will also be about the same length of arrow needed by the compound archer. Using a tape measure or similar, place the end 1 3/4″ past the throat of the nock (remember that amo is actual draw length plus 1 3/4″.) mark the arrow at whatever increments you would like;

The best method of determining correct archery arrow length requires a bow with a light draw weight and an extra long arrow. You will also need an assistant with a marker to help you. When doing this, try to stand as relaxed as possible, don’t stretch yourself, just stand there normally.

In this example the result would be 21.6”, which would be the draw length. The right sized arrow can make or break your shot. Ask someone to put an arrow on the string (preferably blunt arrow) then make a mark on the arrow shaft at the point where it passes the far side of the arrow shelf.

The standard way to measure arrow length is from the back of the point to the throat of the nock. You can measure your true draw length by marking the arrow at the grip area. To get your draw length, divide your wingspan by 2.5 wingspan / 2.5 = draw length.

Start by standing facing a wall and raise the hand you would traditionally hold the bow in up against the wall stretched out straight, then with your drawing hand pull back against your mouth as if you are drawing the bow. A quick and easy way to measure your draw length is to pretend you are actually drawing a bow. You are simply taking the length from fingertip to fingertip and then dividing this by 2.5, the result is your draw length.

Many archers choose to measure their arrows before cutoff by adding 1 ½” to their draw length, which should provide a ballpark length measurement that positions the arrow’s tip slightly past a bow’s riser at full draw. The distance from the grip area to the nock that meets the string is your true draw length. This method is not as consistent as the first method, but if done properly, it will get you a great starting point for a proper draw length.

Third, divide your arm span by 2.5 and round up to the nearest half inch. Do not use any of the information on this page for arrows that will use broadhead or. There are two simple steps to finding your calculated draw length.

This calculation is not exact, your draw length my vary slightly from the number you get, but it will get you a figure that can help you approximate appropriate bow length, safe arrow length, and compound bow draw length. Grab your tape measure and measure the distance between the two points. Proper draw length method 1:

The archery outfitters of shooters sports center will ensure you get the right arrow for your bow. Measure your arm span divide by 2.5 i like to call this the measure and divide method. How do you measure amp draw length?

Another way to gauge basic draw length is to carefully place the nock of an arrow on your chest just below your collarbone with the arrow pointing straight out away from your body. The amp draw length is determined by measuring where the nock point is to the point that is the deepest part of your grip. Simply draw an arrow back to full draw and hold, while another person (safely standing to the side of course) takes a sharpie marker and makes a mark on the arrow approximately 1 forward of the arrow rest.

Your draw length and arrow spine will influence your arrow length. To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest.

For example, if you have a 60 lb. And, there you have it. Finding the right arrow weight.

I would normally round this up to the nearest half an inch so the final result would be 21.5 inches. Notice the point where your middle fingers touch. Then reach your arms forward and put both palms against the arrow.

For almost all shooters, this method is very accurate and the most simple route. Standard draw length based measurement. Given a specific arrow spine, an arrow that is shorter will be more rigid than a shaft of the same spine that is longer.

Pin by JAZMYNE DP on AMERICAN PIE American pie, Freedom